dmesg - Intel Pentium E5800
[ T0] Linux version 6.9.5-1-default (geeko@buildhost) (gcc (SUSE Linux) 13.3.0, GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.42.0.20240130-3) #1 SMP PREEMPT_DYNAMIC Tue Jun 18 07:38:24 UTC 2024 (c9c2e24)
[ T0] BIOS-provided physical RAM map:
[ T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ T0] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ T0] BIOS-e820: [mem 0x00000000000e5000-0x00000000000fffff] reserved
[ T0] BIOS-e820: [mem 0x0000000000100000-0x00000000cdd5ffff] usable
[ T0] BIOS-e820: [mem 0x00000000cdd60000-0x00000000cdd6dfff] ACPI data
[ T0] BIOS-e820: [mem 0x00000000cdd6e000-0x00000000cddb7fff] ACPI NVS
[ T0] BIOS-e820: [mem 0x00000000cddb8000-0x00000000cfffffff] reserved
[ T0] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[ T0] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ T0] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ T0] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ T0] NX (Execute Disable) protection: active
[ T0] APIC: Static calls initialized
[ T0] SMBIOS 2.6 present.
[ T0] DMI: Dell Inc. Inspiron 560 /018D1Y, BIOS A06 12/01/2010
[ T0] tsc: Fast TSC calibration failed
[ T0] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ T0] e820: remove [mem 0x000a0000-0x000fffff] usable
[ T0] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ T0] MTRR map: 9 entries (6 fixed + 3 variable; max 22), built from 8 variable MTRRs
[ T0] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ T0] e820: update [mem 0xcde00000-0xffffffff] usable ==> reserved
[ T0] last_pfn = 0xcdd60 max_arch_pfn = 0x400000000
[ T0] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[ T0] RAMDISK: [mem 0x34c53000-0x36620fff]
[ T0] ACPI: Early table checksum verification disabled
[ T0] ACPI: RSDP 0x00000000000FA520 000024 (v02 ACPIAM)
[ T0] ACPI: XSDT 0x00000000CDD60100 000064 (v01 DELL ECS 20101201 MSFT 00000097)
[ T0] ACPI: FACP 0x00000000CDD60290 0000F4 (v04 120110 FACP1739 20101201 MSFT 00000097)
[ T0] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20230628/tbfadt-564)
[ T0] ACPI: DSDT 0x00000000CDD60640 005993 (v02 1ADXP 1ADXP012 00000012 INTL 20051117)
[ T0] ACPI: FACS 0x00000000CDD6E000 000040
[ T0] ACPI: FACS 0x00000000CDD6E000 000040
[ T0] ACPI: APIC 0x00000000CDD60390 00006C (v02 120110 APIC1739 20101201 MSFT 00000097)
[ T0] ACPI: MCFG 0x00000000CDD60400 00003C (v01 120110 OEMMCFG 20101201 MSFT 00000097)
[ T0] ACPI: SLIC 0x00000000CDD60440 000176 (v01 DELL ECS 20101201 MSFT 00000097)
[ T0] ACPI: OEMB 0x00000000CDD6E040 000072 (v01 120110 OEMB1739 20101201 MSFT 00000097)
[ T0] ACPI: HPET 0x00000000CDD6A640 000038 (v01 120110 OEMHPET 20101201 MSFT 00000097)
[ T0] ACPI: GSCI 0x00000000CDD6E0C0 002024 (v01 120110 GMCHSCI 20101201 MSFT 00000097)
[ T0] ACPI: SSDT 0x00000000CDD706F0 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ T0] ACPI: Reserving FACP table memory at [mem 0xcdd60290-0xcdd60383]
[ T0] ACPI: Reserving DSDT table memory at [mem 0xcdd60640-0xcdd65fd2]
[ T0] ACPI: Reserving FACS table memory at [mem 0xcdd6e000-0xcdd6e03f]
[ T0] ACPI: Reserving FACS table memory at [mem 0xcdd6e000-0xcdd6e03f]
[ T0] ACPI: Reserving APIC table memory at [mem 0xcdd60390-0xcdd603fb]
[ T0] ACPI: Reserving MCFG table memory at [mem 0xcdd60400-0xcdd6043b]
[ T0] ACPI: Reserving SLIC table memory at [mem 0xcdd60440-0xcdd605b5]
[ T0] ACPI: Reserving OEMB table memory at [mem 0xcdd6e040-0xcdd6e0b1]
[ T0] ACPI: Reserving HPET table memory at [mem 0xcdd6a640-0xcdd6a677]
[ T0] ACPI: Reserving GSCI table memory at [mem 0xcdd6e0c0-0xcdd700e3]
[ T0] ACPI: Reserving SSDT table memory at [mem 0xcdd706f0-0xcdd7116b]
[ T0] No NUMA configuration found
[ T0] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[ T0] NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff]
[ T0] Zone ranges:
[ T0] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ T0] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ T0] Normal [mem 0x0000000100000000-0x000000022fffffff]
[ T0] Device empty
[ T0] Movable zone start for each node
[ T0] Early memory node ranges
[ T0] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ T0] node 0: [mem 0x0000000000100000-0x00000000cdd5ffff]
[ T0] node 0: [mem 0x0000000100000000-0x000000022fffffff]
[ T0] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[ T0] On node 0, zone DMA: 1 pages in unavailable ranges
[ T0] On node 0, zone DMA: 97 pages in unavailable ranges
[ T0] On node 0, zone Normal: 8864 pages in unavailable ranges
[ T0] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff]
[ T0] ACPI: PM-Timer IO Port: 0x808
[ T0] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ T0] ACPI: Using ACPI (MADT) for SMP configuration information
[ T0] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ T0] CPU topo: Max. logical packages: 2
[ T0] CPU topo: Max. logical dies: 2
[ T0] CPU topo: Max. dies per package: 1
[ T0] CPU topo: Max. threads per core: 1
[ T0] CPU topo: Num. cores per package: 2
[ T0] CPU topo: Num. threads per package: 2
[ T0] CPU topo: Allowing 2 present CPUs plus 2 hotplug CPUs
[ T0] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0x000e5000-0x000fffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xcdd60000-0xcdd6dfff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xcdd6e000-0xcddb7fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xcddb8000-0xcfffffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfed1ffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed3ffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfedfffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ T0] PM: hibernation: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ T0] [mem 0xd0000000-0xfed1ffff] available for PCI devices
[ T0] Booting paravirtualized kernel on bare hardware
[ T0] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ T0] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ T0] percpu: Embedded 72 pages/cpu s258048 r8192 d28672 u524288
[ T0] pcpu-alloc: s258048 r8192 d28672 u524288 alloc=1*2097152
[ T0] pcpu-alloc: [0] 0 1 2 3
[ T0] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.9.5-1-default splash=silent", will be passed to user space.
[ T0] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ T0] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ T0] Fallback order for Node 0: 0
[ T0] Built 1 zonelists, mobility grouping on. Total pages: 2055402
[ T0] Policy zone: Normal
[ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[ T0] software IO TLB: area num 4.
[ T0] Memory: 3363072K/8352760K available (16384K kernel code, 3000K rwdata, 12940K rodata, 4228K init, 4376K bss, 285328K reserved, 0K cma-reserved)
[ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ T0] Kernel/User page tables isolation: enabled
[ T0] ftrace: allocating 47512 entries in 186 pages
[ T0] ftrace: allocated 186 pages with 5 groups
[ T0] Dynamic Preempt: voluntary
[ T0] rcu: Preemptible hierarchical RCU implementation.
[ T0] rcu: RCU event tracing is enabled.
[ T0] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ T0] Trampoline variant of Tasks RCU enabled.
[ T0] Rude variant of Tasks RCU enabled.
[ T0] Tracing variant of Tasks RCU enabled.
[ T0] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ T0] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ T0] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ T0] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ T0] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ T0] Console: colour dummy device 80x25
[ T0] printk: legacy console [tty0] enabled
[ T0] ACPI: Core revision 20230628
[ T0] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ T0] APIC: Switch to symmetric I/O mode setup
[ T0] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ T0] tsc: PIT calibration matches HPET. 1 loops
[ T0] tsc: Detected 3191.988 MHz processor
[ T0] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e02b942467, max_idle_ns: 440795270039 ns
[ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.97 BogoMIPS (lpj=10639960)
[ T0] CPU0: Thermal monitoring enabled (TM2)
[ T0] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ T0] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ T0] process: using mwait in idle threads
[ T0] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ T0] Spectre V2 : Mitigation: Retpolines
[ T0] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ T0] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ T0] Speculative Store Bypass: Vulnerable
[ T0] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ T0] MMIO Stale Data: Unknown: No mitigations
[ T0] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ T0] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ T0] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ T0] Freeing SMP alternatives memory: 40K
[ T0] pid_max: default: 32768 minimum: 301
[ T0] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,bpf,ima,evm
[ T0] landlock: Up and running.
[ T0] Yama: becoming mindful.
[ T0] AppArmor: AppArmor initialized
[ T0] LSM support for eBPF active
[ T0] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ T0] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ T1] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5800 @ 3.20GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ T1] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ T1] ... version: 2
[ T1] ... bit width: 40
[ T1] ... generic registers: 2
[ T1] ... value mask: 000000ffffffffff
[ T1] ... max period: 000000007fffffff
[ T1] ... fixed-purpose events: 3
[ T1] ... event mask: 0000000700000003
[ T1] signal: max sigframe size: 1520
[ T1] rcu: Hierarchical SRCU implementation.
[ T1] rcu: Max phase no-delay instances is 1000.
[ T8] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ T1] smp: Bringing up secondary CPUs ...
[ T1] smpboot: x86: Booting SMP configuration:
[ T1] .... node #0, CPUs: #1
[ T1] smp: Brought up 1 node, 2 CPUs
[ T1] smpboot: Total of 2 processors activated (12773.95 BogoMIPS)
[ T28] node 0 deferred pages initialised in 40ms
[ T1] devtmpfs: initialized
[ T1] x86/mm: Memory block size: 128MB
[ T1] ACPI: PM: Registering ACPI NVS region [mem 0xcdd6e000-0xcddb7fff] (303104 bytes)
[ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ T1] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ T1] pinctrl core: initialized pinctrl subsystem
[ T1] PM: RTC time: 16:36:27, date: 2024-06-22
[ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ T1] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ T1] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ T1] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ T1] audit: initializing netlink subsys (disabled)
[ T32] audit: type=2000 audit(1719074186.179:1): state=initialized audit_enabled=0 res=1
[ T1] thermal_sys: Registered thermal governor 'fair_share'
[ T1] thermal_sys: Registered thermal governor 'bang_bang'
[ T1] thermal_sys: Registered thermal governor 'step_wise'
[ T1] thermal_sys: Registered thermal governor 'user_space'
[ T1] cpuidle: using governor ladder
[ T1] cpuidle: using governor menu
[ T1] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ T1] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ T1] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[ T1] PCI: Using configuration type 1 for base access
[ T1] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ T1] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ T1] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ T1] Demotion targets for Node 0: null
[ T1] ACPI: Added _OSI(Module Device)
[ T1] ACPI: Added _OSI(Processor Device)
[ T1] ACPI: Added _OSI(3.0 _SCP Extensions)
[ T1] ACPI: Added _OSI(Processor Aggregator Device)
[ T1] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF8B8640A68C00 0002FB (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ T1] ACPI: Dynamic OEM Table Load:
[ T1] ACPI: SSDT 0xFFFF8B8640A68800 0002FB (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ T1] ACPI: _OSC evaluated successfully for all CPUs
[ T1] ACPI: Interpreter enabled
[ T1] ACPI: PM: (supports S0 S3 S4 S5)
[ T1] ACPI: Using IOAPIC for interrupt routing
[ T1] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ T1] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[ T1] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ T1] PCI: Using E820 reservations for host bridge windows
[ T1] ACPI: Enabled 13 GPEs in block 00 to 3F
[ T1] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ T1] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ T1] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ T1] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ T1] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[ T1] PCI host bridge to bus 0000:00
[ T1] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0xcde00000-0xdfffffff window]
[ T1] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ T1] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 conventional PCI endpoint
[ T1] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[ T1] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[ T1] pci 0000:00:02.0: [8086:2e22] type 00 class 0x030000 conventional PCI endpoint
[ T1] pci 0000:00:02.0: BAR 0 [mem 0xfe400000-0xfe7fffff 64bit]
[ T1] pci 0000:00:02.0: BAR 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ T1] pci 0000:00:02.0: BAR 4 [io 0xdc00-0xdc07]
[ T1] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ T1] pci 0000:00:02.1: [8086:2e23] type 00 class 0x038000 conventional PCI endpoint
[ T1] pci 0000:00:02.1: BAR 0 [mem 0xfe800000-0xfe8fffff 64bit]
[ T1] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 conventional PCI endpoint
[ T1] pci 0000:00:1a.0: BAR 4 [io 0xd880-0xd89f]
[ T1] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 conventional PCI endpoint
[ T1] pci 0000:00:1a.1: BAR 4 [io 0xd800-0xd81f]
[ T1] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 conventional PCI endpoint
[ T1] pci 0000:00:1a.7: BAR 0 [mem 0xfe9fa000-0xfe9fa3ff]
[ T1] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[ T1] pci 0000:00:1b.0: BAR 0 [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ T1] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ T1] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ T1] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400 PCIe Root Port
[ T1] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ T1] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 conventional PCI endpoint
[ T1] pci 0000:00:1d.0: BAR 4 [io 0xd400-0xd41f]
[ T1] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 conventional PCI endpoint
[ T1] pci 0000:00:1d.1: BAR 4 [io 0xd080-0xd09f]
[ T1] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 conventional PCI endpoint
[ T1] pci 0000:00:1d.2: BAR 4 [io 0xd000-0xd01f]
[ T1] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 conventional PCI endpoint
[ T1] pci 0000:00:1d.7: BAR 0 [mem 0xfe9f8000-0xfe9f83ff]
[ T1] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ T1] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge
[ T1] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ T1] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ T1] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 conventional PCI endpoint
[ T1] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ T1] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ T1] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ T1] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f conventional PCI endpoint
[ T1] pci 0000:00:1f.2: BAR 0 [io 0xcc00-0xcc07]
[ T1] pci 0000:00:1f.2: BAR 1 [io 0xc880-0xc883]
[ T1] pci 0000:00:1f.2: BAR 2 [io 0xc800-0xc807]
[ T1] pci 0000:00:1f.2: BAR 3 [io 0xc480-0xc483]
[ T1] pci 0000:00:1f.2: BAR 4 [io 0xc400-0xc40f]
[ T1] pci 0000:00:1f.2: BAR 5 [io 0xc080-0xc08f]
[ T1] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 conventional PCI endpoint
[ T1] pci 0000:00:1f.3: BAR 0 [mem 0xfe9f2000-0xfe9f20ff 64bit]
[ T1] pci 0000:00:1f.3: BAR 4 [io 0x0400-0x041f]
[ T1] pci 0000:01:00.0: [168c:002a] type 00 class 0x028000 PCIe Legacy Endpoint
[ T1] pci 0000:01:00.0: BAR 0 [mem 0xfeaf0000-0xfeafffff 64bit]
[ T1] pci 0000:01:00.0: supports D1
[ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ T1] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ T1] pci_bus 0000:03: extended config space not accessible
[ T1] pci 0000:03:01.0: [11ad:0002] type 00 class 0x020000 conventional PCI endpoint
[ T1] pci 0000:03:01.0: BAR 0 [io 0xe800-0xe8ff]
[ T1] pci 0000:03:01.0: BAR 1 [mem 0xfebffc00-0xfebffcff]
[ T1] pci 0000:03:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ T1] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [mem 0xcde00000-0xdfffffff window] (subtractive decode)
[ T1] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ T1] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ T1] ACPI: PCI: Interrupt link LNKB configured for IRQ 5
[ T1] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
[ T1] ACPI: PCI: Interrupt link LNKD configured for IRQ 15
[ T1] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ T1] ACPI: PCI: Interrupt link LNKE disabled
[ T1] ACPI: PCI: Interrupt link LNKF configured for IRQ 14
[ T1] ACPI: PCI: Interrupt link LNKG configured for IRQ 3
[ T1] ACPI: PCI: Interrupt link LNKH configured for IRQ 7
[ T1] iommu: Default domain type: Passthrough
[ T1] pps_core: LinuxPPS API ver. 1 registered
[ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ T1] PTP clock support registered
[ T1] EDAC MC: Ver: 3.0.0
[ T1] NetLabel: Initializing
[ T1] NetLabel: domain hash size = 128
[ T1] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ T1] NetLabel: unlabeled traffic allowed by default
[ T1] mctp: management component transport protocol core
[ T1] NET: Registered PF_MCTP protocol family
[ T1] PCI: Using ACPI for IRQ routing
[ T1] PCI: pci_cache_line_size set to 64 bytes
[ T1] resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ T1] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ T1] e820: reserve RAM buffer [mem 0xcdd60000-0xcfffffff]
[ T1] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ T1] pci 0000:00:02.0: vgaarb: bridge control possible
[ T1] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ T1] vgaarb: loaded
[ T1] hpet: 4 channels of 0 reserved for per-cpu timers
[ T1] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ T1] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ T1] clocksource: Switched to clocksource tsc-early
[ T1] VFS: Disk quotas dquot_6.6.0
[ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ T1] AppArmor: AppArmor Filesystem Enabled
[ T1] pnp: PnP ACPI init
[ T1] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ T1] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ T1] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ T1] system 00:02: [io 0x0a10-0x0a1f] has been reserved
[ T1] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ T1] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ T1] system 00:03: [io 0x0800-0x087f] has been reserved
[ T1] system 00:03: [io 0x0500-0x057f] could not be reserved
[ T1] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ T1] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ T1] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[ T1] system 00:04: [mem 0xffc00000-0xffefffff] has been reserved
[ T1] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ T1] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ T1] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ T1] pnp 00:07: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ T1] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ T1] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ T1] system 00:07: [mem 0x00100000-0xcddfffff] could not be reserved
[ T1] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[ T1] pnp: PnP ACPI: found 8 devices
[ T1] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ T1] NET: Registered PF_INET protocol family
[ T1] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ T1] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ T1] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ T1] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ T1] TCP: Hash tables configured (established 65536 bind 65536)
[ T1] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ T1] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ T1] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ T1] NET: Registered PF_XDP protocol family
[ T1] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ T1] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ T1] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ T1] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ T1] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ T1] resource: avoiding allocation from e820 entry [mem 0xcddb8000-0xcfffffff]
[ T1] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]: assigned
[ T1] resource: avoiding allocation from e820 entry [mem 0xcddb8000-0xcfffffff]
[ T1] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf03fffff]: assigned
[ T1] resource: avoiding allocation from e820 entry [mem 0xcddb8000-0xcfffffff]
[ T1] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]: assigned
[ T1] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]: assigned
[ T1] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]: assigned
[ T1] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ T1] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ T1] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ T1] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ T1] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ T1] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ T1] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf03fffff]
[ T1] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[ T1] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ T1] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ T1] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ T1] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ T1] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ T1] pci_bus 0000:00: resource 8 [mem 0xcde00000-0xdfffffff window]
[ T1] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ T1] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ T1] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ T1] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ T1] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ T1] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf03fffff]
[ T1] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ T1] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ T1] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ T1] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ T1] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ T1] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ T1] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[ T1] pci_bus 0000:03: resource 8 [mem 0xcde00000-0xdfffffff window]
[ T1] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ T1] PCI: CLS 32 bytes, default 64
[ T1] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ T1] software IO TLB: mapped [mem 0x00000000c9d60000-0x00000000cdd60000] (64MB)
[ T10] Trying to unpack rootfs image as initramfs...
[ T1] Initialise system trusted keyrings
[ T1] Key type blacklist registered
[ T1] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ T1] zbud: loaded
[ T1] integrity: Platform Keyring initialized
[ T1] integrity: Machine keyring initialized
[ T1] Key type asymmetric registered
[ T1] Asymmetric key parser 'x509' registered
[ T10] Freeing initrd memory: 26424K
[ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ T1] io scheduler mq-deadline registered
[ T1] io scheduler kyber registered
[ T1] io scheduler bfq registered
[ T1] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ T1] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[ T1] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ T1] Non-volatile memory driver v1.3
[ T1] Linux agpgart interface v0.103
[ T1] ACPI: bus type drm_connector registered
[ T1] i8042: PNP: No PS/2 controller found.
[ T1] i8042: Probing ports directly.
[ T1] serio: i8042 KBD port at 0x60,0x64 irq 1
[ T1] serio: i8042 AUX port at 0x60,0x64 irq 12
[ T1] mousedev: PS/2 mouse device common for all mice
[ T1] rtc_cmos 00:01: RTC can wake from S4
[ T1] rtc_cmos 00:01: registered as rtc0
[ T1] rtc_cmos 00:01: setting system clock to 2024-06-22T16:36:27 UTC (1719074187)
[ T1] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ T1] intel_pstate: CPU model not supported
[ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ T1] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ T1] Console: switching to colour frame buffer device 128x48
[ T1] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ T1] hid: raw HID events driver (C) Jiri Kosina
[ T1] drop_monitor: Initializing network drop monitor service
[ T1] NET: Registered PF_INET6 protocol family
[ T1] Segment Routing with IPv6
[ T1] RPL Segment Routing with IPv6
[ T1] In-situ OAM (IOAM) with IPv6
[ T1] microcode: Current revision: 0x00000a0b
[ T1] IPI shorthand broadcast: enabled
[ T1] sched_clock: Marking stable (447423615, -19991553)->(469519068, -42087006)
[ T1] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ T1] registered taskstats version 1
[ T1] Loading compiled-in X.509 certificates
[ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
[ T1] page_owner is disabled
[ T1] Key type .fscrypt registered
[ T1] Key type fscrypt-provisioning registered
[ T1] Key type encrypted registered
[ T1] AppArmor: AppArmor sha256 policy hashing enabled
[ T1] ima: No TPM chip found, activating TPM-bypass!
[ T1] Loading compiled-in module X.509 certificates
[ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
[ T1] ima: Allocated hash algorithm: sha256
[ T1] ima: No architecture policies found
[ T1] evm: Initialising EVM extended attributes:
[ T1] evm: security.selinux
[ T1] evm: security.SMACK64 (disabled)
[ T1] evm: security.SMACK64EXEC (disabled)
[ T1] evm: security.SMACK64TRANSMUTE (disabled)
[ T1] evm: security.SMACK64MMAP (disabled)
[ T1] evm: security.apparmor
[ T1] evm: security.ima
[ T1] evm: security.capability
[ T1] evm: HMAC attrs: 0x1
[ T1] PM: Magic number: 12:930:641
[ T1] RAS: Correctable Errors collector initialized.
[ T1] clk: Disabling unused clocks
[ T1] PM: genpd: Disabling unused power domains
[ T1] Freeing unused decrypted memory: 2028K
[ T1] Freeing unused kernel image (initmem) memory: 4228K
[ T1] Write protecting the kernel read-only data: 30720k
[ T1] Freeing unused kernel image (rodata/data gap) memory: 1396K
[ T1] Run /init as init process
[ T1] with arguments:
[ T1] /init
[ T1] with environment:
[ T1] HOME=/
[ T1] TERM=linux
[ T1] BOOT_IMAGE=/boot/vmlinuz-6.9.5-1-default
[ T1] splash=silent
[ T1] systemd[1]: systemd 255.7+suse.33.g603cd1d4d8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
[ T1] systemd[1]: Detected architecture x86-64.
[ T1] systemd[1]: Running in initrd.
[ T1] systemd[1]: Hostname set to .
[ T1] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ T1] systemd[1]: Queued start job for default target Initrd Default Target.
[ T1] systemd[1]: Reached target Initrd /usr File System.
[ T1] systemd[1]: Reached target Slice Units.
[ T1] systemd[1]: Reached target Swaps.
[ T1] systemd[1]: Reached target Timer Units.
[ T1] systemd[1]: Listening on Journal Socket (/dev/log).
[ T1] systemd[1]: Listening on Journal Socket.
[ T1] systemd[1]: Listening on udev Control Socket.
[ T1] systemd[1]: Listening on udev Kernel Socket.
[ T1] systemd[1]: Reached target Socket Units.
[ T1] systemd[1]: Starting Create List of Static Device Nodes...
[ T1] systemd[1]: Starting Journal Service...
[ T1] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met.
[ T1] systemd[1]: Starting Apply Kernel Variables...
[ T1] systemd[1]: Starting Virtual Console Setup...
[ T1] systemd[1]: Finished Create List of Static Device Nodes.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ T176] systemd-journald[176]: Collecting audit messages is disabled.
[ T1] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev...
[ T1] systemd[1]: Finished Apply Kernel Variables.
[ T1] systemd[1]: Finished Create Static Device Nodes in /dev.
[ T1] systemd[1]: Reached target Preparation for Local File Systems.
[ T1] systemd[1]: Reached target Local File Systems.
[ T1] systemd[1]: Started Journal Service.
[ T296] raid6: sse2x4 gen() 12010 MB/s
[ T296] raid6: sse2x2 gen() 11855 MB/s
[ T185] tsc: Refined TSC clocksource calibration: 3191.999 MHz
[ T185] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c398820, max_idle_ns: 440795273435 ns
[ T296] raid6: sse2x1 gen() 10117 MB/s
[ T296] raid6: using algorithm sse2x4 gen() 12010 MB/s
[ T296] raid6: .... xor() 2984 MB/s, rmw enabled
[ T296] raid6: using ssse3x2 recovery algorithm
[ T185] clocksource: Switched to clocksource tsc
[ T296] xor: measuring software checksum speed
[ T296] prefetch64-sse : 17499 MB/sec
[ T296] generic_sse : 14906 MB/sec
[ T296] xor: using function: prefetch64-sse (17499 MB/sec)
[ T296] Btrfs loaded, assert=on, zoned=yes, fsverity=yes
[ T319] SCSI subsystem initialized
[ T330] ACPI: bus type USB registered
[ T330] usbcore: registered new interface driver usbfs
[ T330] usbcore: registered new interface driver hub
[ T330] usbcore: registered new device driver usb
[ T319] alua: device handler registered
[ T10] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ T10] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ T10] ehci-pci 0000:00:1a.7: debug port 1
[ T319] rdac: device handler registered
[ T10] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fa000
[ T10] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ T10] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ T10] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T10] usb usb1: Product: EHCI Host Controller
[ T10] usb usb1: Manufacturer: Linux 6.9.5-1-default ehci_hcd
[ T10] usb usb1: SerialNumber: 0000:00:1a.7
[ T10] hub 1-0:1.0: USB hub found
[ T10] hub 1-0:1.0: 6 ports detected
[ T29] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ T29] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ T29] ehci-pci 0000:00:1d.7: debug port 1
[ T29] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9f8000
[ T29] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ T29] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ T29] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T29] usb usb2: Product: EHCI Host Controller
[ T29] usb usb2: Manufacturer: Linux 6.9.5-1-default ehci_hcd
[ T29] usb usb2: SerialNumber: 0000:00:1d.7
[ T29] hub 2-0:1.0: USB hub found
[ T29] hub 2-0:1.0: 6 ports detected
[ T336] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ T336] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ T336] uhci_hcd 0000:00:1a.0: detected 2 ports
[ T336] uhci_hcd 0000:00:1a.0: irq 16, io port 0x0000d880
[ T336] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ T336] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T336] usb usb3: Product: UHCI Host Controller
[ T336] usb usb3: Manufacturer: Linux 6.9.5-1-default uhci_hcd
[ T336] usb usb3: SerialNumber: 0000:00:1a.0
[ T336] hub 3-0:1.0: USB hub found
[ T336] hub 3-0:1.0: 2 ports detected
[ T336] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ T336] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ T336] uhci_hcd 0000:00:1a.1: detected 2 ports
[ T336] uhci_hcd 0000:00:1a.1: irq 21, io port 0x0000d800
[ T336] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ T336] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T336] usb usb4: Product: UHCI Host Controller
[ T336] usb usb4: Manufacturer: Linux 6.9.5-1-default uhci_hcd
[ T336] usb usb4: SerialNumber: 0000:00:1a.1
[ T336] hub 4-0:1.0: USB hub found
[ T336] hub 4-0:1.0: 2 ports detected
[ T336] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ T336] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ T336] uhci_hcd 0000:00:1d.0: detected 2 ports
[ T336] uhci_hcd 0000:00:1d.0: irq 23, io port 0x0000d400
[ T336] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ T336] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T336] usb usb5: Product: UHCI Host Controller
[ T336] usb usb5: Manufacturer: Linux 6.9.5-1-default uhci_hcd
[ T336] usb usb5: SerialNumber: 0000:00:1d.0
[ T336] hub 5-0:1.0: USB hub found
[ T336] hub 5-0:1.0: 2 ports detected
[ T336] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ T336] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ T336] uhci_hcd 0000:00:1d.1: detected 2 ports
[ T336] uhci_hcd 0000:00:1d.1: irq 19, io port 0x0000d080
[ T336] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ T336] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T336] usb usb6: Product: UHCI Host Controller
[ T336] usb usb6: Manufacturer: Linux 6.9.5-1-default uhci_hcd
[ T336] usb usb6: SerialNumber: 0000:00:1d.1
[ T336] hub 6-0:1.0: USB hub found
[ T336] hub 6-0:1.0: 2 ports detected
[ T336] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ T336] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ T336] uhci_hcd 0000:00:1d.2: detected 2 ports
[ T336] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000d000
[ T336] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ T336] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ T336] usb usb7: Product: UHCI Host Controller
[ T336] usb usb7: Manufacturer: Linux 6.9.5-1-default uhci_hcd
[ T336] usb usb7: SerialNumber: 0000:00:1d.2
[ T319] emc: device handler registered
[ T336] hub 7-0:1.0: USB hub found
[ T336] hub 7-0:1.0: 2 ports detected
[ T319] libata version 3.00 loaded.
[ T319] ata_piix 0000:00:1f.2: version 2.13
[ T319] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ T319] scsi host0: ata_piix
[ T319] scsi host1: ata_piix
[ T319] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19 lpm-pol 0
[ T319] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 lpm-pol 0
[ T26] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[ T26] usb 6-2: New USB device found, idVendor=413c, idProduct=2107, bcdDevice= 1.78
[ T26] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ T26] usb 6-2: Product: Dell USB Entry Keyboard
[ T26] usb 6-2: Manufacturer: DELL
[ T315] pci 0000:00:00.0: Intel G45/G43 Chipset
[ T315] resource: avoiding allocation from e820 entry [mem 0xcddb8000-0xcfffffff]
[ T315] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ T315] pci 0000:00:00.0: detected 32768K stolen memory
[ T331] usbcore: registered new interface driver usbhid
[ T331] usbhid: USB HID core driver
[ T315] Console: switching to colour dummy device 80x25
[ T315] i915 0000:00:02.0: vgaarb: deactivate vga console
[ T198] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ T44] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ T369] ata1: found unknown device (class 0)
[ T369] ata1.00: SATA link down (SStatus 4 SControl 300)
[ T369] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ T371] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ T371] ata2.01: SATA link down (SStatus 4 SControl 300)
[ T371] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7250H, 100A, max UDMA/100
[ T371] ata2.00: configured for UDMA/100
[ T198] usb 4-2: New USB device found, idVendor=0461, idProduct=4d81, bcdDevice= 2.00
[ T198] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ T198] usb 4-2: Product: USB Optical Mouse
[ T335] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/0003:413C:2107.0001/input/input3
[ T315] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1
[ T44] usb 2-5: New USB device found, idVendor=058f, idProduct=6362, bcdDevice= 1.00
[ T44] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ T44] usb 2-5: Product: Mass Storage Device
[ T44] usb 2-5: Manufacturer: Generic
[ T44] usb 2-5: SerialNumber: 058F63626420
[ T335] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.1-2/input0
[ T335] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/0003:0461:4D81.0002/input/input4
[ T335] hid-generic 0003:0461:4D81.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2/input0
[ T332] usb-storage 2-5:1.0: USB Mass Storage device detected
[ T332] scsi host2: usb-storage 2-5:1.0
[ T332] usbcore: registered new interface driver usb-storage
[ T10] fbcon: i915drmfb (fb0) is primary device
[ T10] Console: switching to colour frame buffer device 200x56
[ T10] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ T369] ata1.01: ATA-7: TOSHIBA MK8034GSX, AH301A, max UDMA/100
[ T369] ata1.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ T369] ata1.01: configured for UDMA/100
[ T29] scsi 0:0:1:0: Direct-Access ATA TOSHIBA MK8034GS 1A PQ: 0 ANSI: 5
[ T29] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ T10] sd 0:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ T10] sd 0:0:1:0: [sda] Write Protect is off
[ T10] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ T10] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ T10] sd 0:0:1:0: [sda] Preferred minimum I/O size 512 bytes
[ T188] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7250H 100A PQ: 0 ANSI: 5
[ T188] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ T10] sda: sda1 sda2 sda3 sda4 sda5
[ T10] sd 0:0:1:0: [sda] Attached SCSI disk
[ T332] usbcore: registered new interface driver uas
[ T329] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ T329] cdrom: Uniform CD-ROM driver Revision: 3.20
[ T329] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ T377] scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ T377] scsi 2:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ T377] scsi 2:0:0:2: Direct-Access Generic- SM/xD Picture 1.02 PQ: 0 ANSI: 0
[ T377] scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ T377] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ T377] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ T377] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ T377] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ T10] sd 2:0:0:0: [sdb] Media removed, stopped polling
[ T10] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ T188] sd 2:0:0:1: [sdc] Media removed, stopped polling
[ T188] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ T29] sd 2:0:0:2: [sdd] Media removed, stopped polling
[ T29] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ T382] sd 2:0:0:3: [sde] Media removed, stopped polling
[ T382] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ T438] BTRFS: device fsid e355389d-2eed-4b91-98f4-03ac564934f1 devid 1 transid 50894 /dev/sda4 (8:4) scanned by mount (438)
[ T438] BTRFS info (device sda4): first mount of filesystem e355389d-2eed-4b91-98f4-03ac564934f1
[ T438] BTRFS info (device sda4): using crc32c (crc32c-generic) checksum algorithm
[ T438] BTRFS info (device sda4): using free-space-tree
[ T176] systemd-journald[176]: Received SIGTERM from PID 1 (systemd).
[ T1] systemd[1]: systemd 255.7+suse.33.g603cd1d4d8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified)
[ T1] systemd[1]: Detected architecture x86-64.
[ C1] random: crng init done
[ T1] systemd[1]: bpf-lsm: LSM BPF program attached
[ T1] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ T1] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped Switch Root.
[ T1] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ T1] systemd[1]: Created slice Slice /system/getty.
[ T1] systemd[1]: Created slice Slice /system/modprobe.
[ T1] systemd[1]: Created slice User and Session Slice.
[ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ T1] systemd[1]: Stopped target Switch Root.
[ T1] systemd[1]: Stopped target Initrd File Systems.
[ T1] systemd[1]: Stopped target Initrd Root File System.
[ T1] systemd[1]: Reached target Local Integrity Protected Volumes.
[ T1] systemd[1]: Reached target Remote File Systems.
[ T1] systemd[1]: Reached target Slice Units.
[ T1] systemd[1]: Reached target System Time Set.
[ T1] systemd[1]: Reached target Local Verity Protected Volumes.
[ T1] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ T1] systemd[1]: Listening on Process Core Dump Socket.
[ T1] systemd[1]: Listening on udev Control Socket.
[ T1] systemd[1]: Listening on udev Kernel Socket.
[ T1] systemd[1]: Mounting Huge Pages File System...
[ T1] systemd[1]: Mounting POSIX Message Queue File System...
[ T1] systemd[1]: Mounting Kernel Debug File System...
[ T1] systemd[1]: Mounting Kernel Trace File System...
[ T1] systemd[1]: Starting Create List of Static Device Nodes...
[ T1] systemd[1]: Starting Load Kernel Module configfs...
[ T1] systemd[1]: Starting Load Kernel Module dm_mod...
[ T1] systemd[1]: Starting Load Kernel Module drm...
[ T1] systemd[1]: Starting Load Kernel Module efi_pstore...
[ T1] systemd[1]: Starting Load Kernel Module fuse...
[ T1] systemd[1]: Starting Load Kernel Module loop...
[ T1] systemd[1]: plymouth-start.service: Deactivated successfully.
[ T1] systemd[1]: plymouth-start.service: Unit process 340 (plymouthd) remains running after unit stopped.
[ T1] systemd[1]: Stopped Show Plymouth Boot Screen.
[ T1] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ T1] systemd[1]: Reached target Local Encrypted Volumes.
[ T1] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped Plymouth switch root service.
[ T1] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[ T1] systemd[1]: Stopped File System Check on Root Device.
[ T1] systemd[1]: Starting Journal Service...
[ T1] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met.
[ T1] systemd[1]: Apply Kernel Variables for 6.9.5-1-default from /boot was skipped because of an unmet condition check (ConditionPathExists=!/usr/lib/modules/6.9.5-1-default/sysctl.conf).
[ T1] systemd[1]: Starting Apply Kernel Variables for 6.9.5-1-default...
[ T1] systemd[1]: Starting Remount Root and Kernel File Systems...
[ T1] systemd[1]: Starting Coldplug All udev Devices...
[ T1] systemd[1]: Finished Create List of Static Device Nodes.
[ T1] systemd[1]: [email protected]: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module drm.
[ T1] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ T1] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module efi_pstore.
[ T1] systemd[1]: Finished Apply Kernel Variables for 6.9.5-1-default.
[ T1] systemd[1]: Starting Apply Kernel Variables...
[ T1] systemd[1]: [email protected]: Deactivated successfully.
[ T1] systemd[1]: Finished Load Kernel Module configfs.
[ T1] systemd[1]: Mounted Kernel Debug File System.
[ T1] systemd[1]: Mounting Kernel Configuration File System...
[ T494] systemd-journald[494]: Collecting audit messages is disabled.
[ T1] systemd[1]: Started Journal Service.
[ T489] device-mapper: uevent: version 1.0.3
[ T489] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[ T493] loop: module loaded
[ T492] fuse: init (API version 7.40)
[ T549] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ T549] ACPI: button: Power Button [PWRB]
[ T549] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ T549] ACPI: button: Power Button [PWRF]
[ T540] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20230628/utaddress-204)
[ T540] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ T540] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_SB.PCI0.SBRG.SVC2) (20230628/utaddress-204)
[ T540] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ T540] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ T548] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1
[ T548] net eth0: Lite-On 82c168 PNIC rev 33 at Port 0xe800, 00:a0:cc:39:0b:45, IRQ 16
[ T530] iTCO_vendor_support: vendor-support=0
[ T549] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ T382] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ T382] i2c i2c-7: Successfully instantiated SPD at 0x50
[ T382] i2c i2c-7: Successfully instantiated SPD at 0x51
[ T552] tulip 0000:03:01.0 enp3s1: renamed from eth0
[ T547] gpio_ich gpio_ich.2.auto: GPIO from 512 to 572
[ T548] at24 7-0050: supply vcc not found, using dummy regulator
[ T548] at24 7-0050: 256 byte spd EEPROM, read-only
[ T548] at24 7-0051: supply vcc not found, using dummy regulator
[ T548] at24 7-0051: 256 byte spd EEPROM, read-only
[ T527] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ T527] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ T527] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ T530] iTCO_wdt iTCO_wdt.1.auto: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ T530] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ T528] intel_powerclamp: No package C-state available
[ T553] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ T625] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ T625] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ T625] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ T625] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ T625] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ T625] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ T625] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ T625] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ T286] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ T286] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ T286] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ T286] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ T286] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ T286] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ T286] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ T286] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ T286] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ T527] ath: EEPROM regdomain: 0x60
[ T527] ath: EEPROM indicates we should expect a direct regpair map
[ T527] ath: Country alpha2 being used: 00
[ T527] ath: Regpair used: 0x60
[ T527] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ T527] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0x000000002d897353, irq=16
[ T551] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[ T494] systemd-journald[494]: Received client request to flush runtime journal.
[ T729] Adding 2097216k swap on /dev/sda5. Priority:-2 extents:1 across:2097216k
[ T494] systemd-journald[494]: /var/log/journal/242cbc43de074b5282512600f1857a65/system.journal: Journal file uses a different sequence number ID, rotating.
[ T494] systemd-journald[494]: Rotating system journal.
[ T32] audit: type=1400 audit(1719074205.173:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=749 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.176:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=750 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.193:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=752 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.240:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=753 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.293:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=755 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.343:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=756 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.366:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=757 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.393:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=758 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.426:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=759 comm="apparmor_parser"
[ T32] audit: type=1400 audit(1719074205.436:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=760 comm="apparmor_parser"
[ T1041] NET: Registered PF_QIPCRTR protocol family
[ T1154] NET: Registered PF_PACKET protocol family
[ C1] net enp3s1: Setting full-duplex based on MII#1 link partner capability of c5e1
[ T494] systemd-journald[494]: /var/log/journal/242cbc43de074b5282512600f1857a65/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ T188] BTRFS info (device sda4): qgroup scan completed (inconsistency flag cleared)
[ C1] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ C1] perf: interrupt took too long (3144 > 3136), lowering kernel.perf_event_max_sample_rate to 63600
[ C1] perf: interrupt took too long (3948 > 3930), lowering kernel.perf_event_max_sample_rate to 50400
[ C1] perf: interrupt took too long (4937 > 4935), lowering kernel.perf_event_max_sample_rate to 40500
[T31316] block sda: the capability attribute has been deprecated.
[ T383] NET: Registered PF_ALG protocol family
[T18909] BTRFS info (device sda4): qgroup scan completed (inconsistency flag cleared)
[T17403] BTRFS info (device sda4): qgroup scan completed (inconsistency flag cleared)
[T20259] BTRFS info (device sda4): qgroup scan completed (inconsistency flag cleared)
[ T945] BTRFS info (device sda4): qgroup scan completed (inconsistency flag cleared)